Basket is empty

Step 1

Measure the maximum height you want the water level to be in your water butt from ground level.

Step 2

Add 119mm to the above dimensions and then measure that distance up the drainpipe from the ground level and mark that point on the drainpipe. Measure down from that mark the distance as indicated in the instructions for the type of drainpipe you have. Make the two cuts at the marked positions on the drainpipe.

Step 3

Place the square to round adapter on the bottom piece of drainpipe if needed. Place the filter body onto the adaptor or directly onto the bottom piece of drainpipe. Place the filter top onto the filter body, make sure the filter body bracket is flat to the wall and the top piece of drainpipe is lined up with the top of the filter top.

Step 4

Place the filter basket in the filter body, make sure the filter basket is lined up correctly and place the filter top on the body. If saving water, fit the joining hose to the elbow and fit the elbow to the filter body, be aware the elbow fits only in one of two positions. Connect the other end of the hose to the water butt.

Step 5

Installation should look as per photo.

Step 6

To clean the filter, remove the filter top, lift out the filter basket, empty the debris replace the basket making sure you position the basket correctly for your water saving requirements and replace the top