- Full Description
Do you have a medium sized garden? Why not kick start your rainwater harvesting itch with this Professional Gardening Pack. This package comes with a static 3000 Litre water tank to store and reuse all the rainwater collected. The water tank is can be easily stored behind a shed or down a side of the house. The high pressure pump is excellent when used with a long garden hose on the end of white you want to attach a spray gun or sprinkler to.
- Technical Spec
Static Water Tank Dimensions:
- Capacity: 3100 Litres (681 gallons)
- Length: 2240 mm
- Overall width: 1275 mm
- Height: 1390 mm
- Lid: 455 mm
- Outlet: 2" BSP (other sizes available upon request)
- Material: Rotationally moulded for strength from UV stabilised polyethylene to prevent splitting or rupturing.
Water Pump Specification:
- Outlet (FBSP) – 1”
- kW – 0.90
- Volt – 230
- Flow (l/min) – 115
- Head (mtrs) – 34 W x l x h (mm) – 150 x 170 x 410
- Vessel/Well size (mm) – 350+
- Dry weight (kgs) – 7.85
- Packing weight (kgs) – 8.55
- Suitable for gardens/hoses up to 50 metres in length
Completely harmless to children and pets.
One 500ml bottle could last for six to nine months and treat up to 6500 Litres of water.
GutterMate Filter & Diverter:
Each box contains:
- Gutter Mate Filter Square to round adaptor for Square Downpipes
- Blanking Cap for Diverter outlet, if needed
- Hose Adaptor for Water Butt Screws and plugs for fitting Gutter mate to wall.
- 500mm of hose to connect Gutter Mate to water butt or tank. Subject to distance between Gutter mate and water butt / tank a longer length of hose may be needed. Which is available on this link GutterMate hose
The GutterMate rainwater diverter and filter is made from Polypropylene and is available in Black, White or Brown, to suit the colour of your drainpipe.
The product is supplied with the fixing screws and mounting bracket. There are 5 parts to the filter which are a slide fit into each other. The filter basket filters all the rainwater which falls down the downpipe.
The user has the choice of using the Diverter outlet (the smaller of the 2) or the main outlet to divert the rain water into a rainwater tub or rain water harvesting tank.
If the degree of filtration is inadequate for the use you are putting the rain water too, we have a Fine Mesh Insert available which fits into the filter basket and provides a far higher degree of filtration (800 micron). This will allow you to use the rainwater in your pressure washer and for washing the car.
If your guttering is attached to square downpipe, there is an adaptor in the box to allow the filter to be fitted to square drainpipes which are installed with close fitting brackets. If you have standard brackets you will not need the adaptor.
This rain water filter goes a long way to solving an age old problem associated with guttering and drainpipe systems on buildings. The biggest problem with guttering is it gets filled with leaves, stones, sand and moss. The result can be blockages or over flowing gutters.
This in turn can lead to damp penetrating the wall of your building or damp getting to the roof joists. Gutter blockage and overflow can lead to extremely expensive repairs to your property. The other problem associated with blocked guttering and drainpipes is the inherent danger of inspecting and cleaning them. Use of ladders should be avoided at all times if there is an alternative, namely the Gutter Mate Filter.
Downpipe (Drainpipe) Sizes:
The GutterMate is designed to accept 68mm, 76mm and 80mm diameter and 65mm and 75mm square downpipes, without any adaptors or reducers, other than the square to round adaptor supplied with the filter, if needed as per the instructions. This adaptor is used if your square downpipe is fitted using “close fitting mounting brackets” to your house.
If the downpipe is fitted with “standoff mounting brackets”, the square to round adaptor is not needed. If the downpipe is larger than 80mm you will need a male to female reducer to get into the top of the filter. The GutterMate filter should not be used on downpipes larger than 100mm diameter and if using this diameter of downpipe consideration should be given as to the total roof area the filter is rainwater collecting from. The GutterMate rain water collecting filter can be used in the following applications.
Two common sizes of downpipe for Greenhouses, sheds and garages are 50 and 40mm diameter downpipes.In addition there are some metal downpipe sizes where the internal diameter of the pipe is too small to accept the main outlet of the Gutter Mate.
The filter can be used on these downpipes, when using these sizes a male female reducer will be needed for connection to the main outlet of the filter. The standard reducer available is 68mm female to 50mm, this can be used on either 40 or 50 mm. downpipe.
Multi-purpose, flexible corrugated clear plastic garden hose 20mm bore.
Write Your Own Review